Electrochemical trepanning with uniform electrolyte flow around the entire blade profile

In the traditional machining process for diffusers, blades are easily deformed, and methods suffer from high tool wear and low efficiency. Electrochemical machining(ECM) possesses unique advantages when applied to these difficult-to-machine materials. In the ECM process, theflow field plays a crucial role. Here, an electrolyte flow mode that supplies uniform flow around the entire blade profile was adopted for electrochemical trepanning of diffusers. Various flow rates were employed to obtain the optimal flow field. Simulations were conducted using ANSYS software, and results indicated that increasing the flow rate substantially afforded a more uniform flowfield. A series of experiments was then performed, and results revealed that increasing the flow rate greatly improved both the machining efficiency and the surface quality of the diffusers. The maximum feeding rate of the cathode reached 4 mm/min, the blade taper of the concave part decreased to 0.02, and the blade roughness was reduced to 1.216 lm. The results of this study demonstrated the high feasibility of this method and its potential for machining other complex components for engineering applications.     

仿鞭毛菌游动的微型机器人近壁运动

鞭毛菌及模仿其运行的微机器人在靠近壁面游动时，其运动模式与远离壁面时有所不同。针对这一现象，本文利用抗力理论和Stokes方程的线性性质，对鞭毛菌在壁面附近运动时流体对其施加的作用力进行分析，建立了鞭毛菌近壁运动的动力学模型。同时计算了细菌在平行于壁面平面内的运动轨迹与游动速度，并与实验数据进行对比分析，结果验证了该理论模型 的有效性。在此基础上，探讨了鞭毛尾的几何和运动学参数与细菌的速度变化量之间的关系。本文研究为微型仿生游动机器人运动控制时规避近壁效应提供参考依据。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

构建“突出数字”的教学体系创新“强化实践”的实验方法

本文是对《电工学〈电子技术〉》课程的改革与实践的总结,主要介绍了“强化数字,突出集成,注重实践”的模块化教学体系和阶梯式实验方法.     

平面激光诱导荧光显示火焰中OH的分布图像

用平面激光诱导荧光技术测量了平面火焰炉、原子气化炉和超声速燃烧室的单脉冲激光诱导OH荧光。由平面荧光图可得到氢氧基相对浓度分布和它的厚度。由超声速燃烧室的OH荧光测量 ,可以看出不同时间OH分布的差别。氢氧基的PLIF图像是研究火焰结构和流场的有力工具。     

旋翼着陆器在火星探测中的研究进展

旋翼着陆器是下一轮国际火星探测的重要发展方向.论文首先回顾了火星探测软着陆的发展概况,分析了旋翼着陆器的结构组成、火星探测工作原理及特点.其次,阐述了开展旋翼着陆器设计过程中所需的关键技术.     

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

基于时频图像形态学的雷达信号IF估计

针对低信噪比下雷达信号的IF估计,提出一种将时频分析和图像处理相结合的估计方法.首先通过时频变换将一维信号转化为二维时频图像;然后采用形态学方法去除时频图像上的噪声点和毛刺,并将其骨骼化;最后采用图像处理中标注连接分量的方法,区分出不同分量的雷达信号以及噪声分量,并通过统计信号分量的行索引和列索引估计出信号的IF.对SFM、LFM和FSK信号的IF估计进行了仿真分析,实验结果表明该方法能够在较低信噪比下有效地估计出信号的IF,同时也适用于多分量信号.